Zotac ID91 Hackintosh Yosemite Clover Install Guide

This guide is written to get you up and running with the latest OS X Yosemite 10.10.2 with Clover bootloader.  I used to use MultiBeast but it took a while to learn Clover, however the advantages are worth the learning curve.  This guide should get you up and running on a Zotac ID91 – a perfect <$400 hackintosh!

Pre-Requisites:

• Download latest OS X Yosemite on a Mac – or find it on the bitttorrents
• 8GB or greater USB Key
• Software:

Latest Clover bootloader from Sourceforge

1.  Format an 8gb or greater USB Key with 1 partition – GUID boot loader – and OS X Journled partition.

2.  Run the following – replacing XXX with the location of your USB Drive.
[raw]sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia –volume /Volumes/XXX/ –applicationpath /Applications/Install OS X Yosemite.app –no interaction[/raw]

This will extract Yosemite onto your USB Key

3.  Install Clover – with following settings

Now we must mount the EFI Partition and add our Extensions to the 10.10 kexts folder to make things work ootb.

To mount your EFI Partition, use

[raw]diskutil list[/raw]

Determine your drive and EFI Partition and mount with

[raw]diskutil mount disk1s1[/raw]

Add the following kexts to your EFI/Clover/Kexts/10.10 folder –

AppleACPIPS2Nub.kext
ApplePS2Controller.kext
FakeSMC.kext
lspcidrv.kext
NullCPUPowerManagement.kext
Patched_10.7_AppleRTC.kext

Restart with the new USB Key

Goto Options > Binaries Patching Menu >  Kernel PM Patch and hit spacebar to enable it

Boot the installer

Format your boot drive with GUID bootloader and Mac OS X Journaled

Stuck in a reboot loop?

Remember if you restart at this point, the Kernel PM must be enabled each time – until we install Clover on the main boot drive –

Audio:

1. Clover patched AppleHDA
   1. Download (View Raw) audio_cloverALC-100.command
   2. Double click: Downloads/audio_cloverALC-100.command
   3. Password:
   4. Confirm Codec ALCxxx: (885, 887, 888, 889, 892, 898, 1150 only)
   5. Clover/Legacy: answer y to Confirm Clover Legacy Install (y/n)
   6. Clover Audio ID Injection (y/n):
   7. Use Audio ID: x (y/n):
   8. Optional: Terminal/Terminal Saved Output
2. Restart
3. Verify ALC onboard audio
   1. System Preferences/Sound/Output/select audio device

Incomplete – not enabled yet.  Lookup HD4400 HDMI Audio for guides

Graphics: Intel HD4400 Desktop using FakePCIID

• Install latest version of FakePCIID from https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads
  Install both FakePCIID.kext and FakePCIID_HD4600_HD4400.kext in /System/Library/Extensions, /Extra/Extensions or Clover kexts.
• Insert a fakeid and platform-id through clover configurator.

  Devices>FakeID>IntelGFX = 0x04128086
  Graphics>Inject>Intel>ig-platform-id = 0x0d220003